Filter
Top Products
Configuration Files
A - 3
• <call/>—Specify call routing parameters and auto-answer parameters.
• <log/>—Specify basic logging levels.
• <sec/>—Specify H.323 media encryption parameters
• <mb/>—Specify the Application browser home page, a proxy to use, and
size limits.
• <reg/>—Specify the registration protocol.
• <prov/>—Specify the H.323 line provisioned by the Polycom®
Converged Management Application™ (CMA™) system.
The precedence order for configuration parameter changes is as follows
(highest to lowest):
• User changes through the phone’s user interface
• Web configuration through a browser
• Polycom CMA system
• Configuration files
• Default values
For detailed information on configuration parameters, including permitted
values, default values, types of parameters, and how phone-specific
parameters can be created, refer to “Configuration Parameters” in the
“Configuration Files” appendix of the latest Administrator’s Guide for the
Polycom UC Software.
<voIpProt/>
Edit the
voIpProt
parameter as shown below:
• Enable the H.323 protocol.
• Disable the SIP protocol.