Filter
Top Products
Deployment Guide for the Polycom VVX 1500 D Phone
2 - 18
Enabling Provisioning Using a Polycom CMA System
To configure the provisioning service settings on VVX 1500 D phones:
1. Press the Menu key, and then select Settings > Advanced >
Admininstration Settings > Network Configuration > CMA Menu.
You must enter the administrator password to access the network
configuration. The factory default password is 456.
2. Enter the following values:
— CMA Mode: Select Static or Auto.
— Server Address: Enter the address of the Polycom CMA system
running the provisioning service. The address can bean IP address or
a fully qualified domain name. For example, 123.45.67.890 .
3. Scroll to Login Credentials and tap the Select soft key. Enter the
following values:
—CMA Domain: Enter the domain for registering to the provisioning
service. For example, NorthAmerica .
—CMA User: Enter the username for registering to the provisioning
service. For example, bsmith .
— CMA Password: Enter the password that registers the VX 1500 D
phone to the provisioning service (associated with the CMA user
account). For example, 123456 .
4. Tap the Back soft key three times.
5. Select Save Config.
The VVX 1500 D phone reboots.
You can confirm the connection to the Polycom CMA system by:
— Reviewing the log files on the provisioning server. Look for entries
like:
000108.554|cfg |2|00|RT|Enterprise Credentials waiting
to acquire mutex <0x1b> timeoutValue <25> ticks
Note
The Polycom CMA server will auto-provision the H.323 line onto Line Key 1 on the
VVX 1500 D phone. If there is an existing SIP line associated with Line Key 1, it will
be overwritten. You can configure the H.323 line (auto-provisioned by the Polycom
CMA server) to be on a specific line key by entering the value in
prov.line.map.cma.1
. Refer to Polycom CMA Provisioning on page 2-8.
Note
If you are not using a Single Sign On login with Active Directory on the Polycom
CMA system, the domain will be local using the local accounts created on the
Polycom CMA server.