Filter
Top Products
Setting Up the Polycom VVX 1500 D Phone
2 - 3
c Change the phone’s configuration to use the Polycom CMA system for
provisioning. Refer to Enabling Provisioning Using a Polycom CMA
System on page 2-18.
Once the VVX 1500 D phone is provisioned by a Polycom CMA system,
future phone software upgrades are managed by the Polycom CMA
system as well.
Refer to Deploying the Phones Using a Polycom CMA System on page
2-17.
For more information on configuring the Polycom VVX 1500 D phone, refer to
the latest Administrator’s Guide for the Polycom UC Software, which is available
at
http://www.polycom.com/support/video/business_media_phones/vvx15
00d.html .
Connecting the Phone to the Network
The following figure shows how to connect the phone to the network.
Note
You can also set up the VVX 1500 D phone in a “hybrid” system where the VVx
1500 phones can be provisioned by both a Polycom CMA system and a
provisioning server. In this scenario, you should review the configuration
parameters mentioned in Configuring the Phones on page 2-4.
Note
Connecting the Polycom VVX 1500 D phone to the network is optional, but highly
recommended (for the reasons discussed at the beginning of this chapter).
2
3
1