Sensaphone
®
Model 1104 User’s Manual
62
To cancel the power-failure message locally at the keypad
(during or after Recognition Time) press any key on the
Model 1104 keypad. This action also cancels the dial-out
process. The AC power failure alarm may also be cancelled
remotely, by telephone acknowledgment (see Chapter 6,
Section 6.1).
5.9.1 Programming Power Failure Recognition Time
1. Press SET.
2. Press RECOGNITION TIME.
3. Press POWER. The Model 1104 responds: “Enter
minutes.”
4. Using the number keys, enter the number of minutes. The
Model 1104 will recite the digits as they are pressed.
5. Press ENTER. The Model 1104 responds: “Enter
seconds.”
ENTER
TONE
PM
ENTER
TONE
PM