Phonetics 1104 Telephone User Manual


 
Chapter 4: Communications Programming
27
3. Press the number key (from 1 to 4) representing the
telephone number you want to erase.
4. Press ENTER. The Model 1104 will say Enter.
ENTER
TONE
PM
ENTER
TONE
PM
4.3 Tone or Pulse Dialing
The Model 1104 can dial out in pulse or Touch Tone
. Select
the type of dialing, in either pulse or tone, depending upon the
type of service provided by your telephone company. The
default is tone.
To program for either pulse or tone:
1. Press the SENSOR ON/OFF key.
2. Press TONE.
ENTER
TONE
PM
ENTER
TONE
PM
The Model 1104 will respond: Off to indicate that tone
dialing is off and pulse is enabled, or On to indicate
that tone dialing is on and pulse is disabled.
3. Repeat key sequence to switch between settings.
4.4 Special Dialing
The Model 1104 has provisions for special dialing sequences.
Special dialing sequences allow:
Dialing that requires an access number to connect with
an outside line.