Filter
Top Products
Chapter 5: Alarm Programming
59
3. Press the number (1 to 4) of the selected temperature
input to be calibrated.
4. Enter the number required to offset the current tempera-
ture reading so a correct reading is obtained.
• To program a positive offset number (up to +10
degrees), enter the number on the keypad. The Model
1104 recites the digits as they are pressed.
• To program a negative offset number (up to –10
degrees), first press PAUSE. The unit responds with a
“beep.” Next, enter the number on the keypad. The unit
recites the digits as they are pressed.
5. Press ENTER. The Model 1104 responds:“Enter.”
ENTER
TONE
PM
ENTER
TONE
PM
NOTE
If you find that your calibration offset exceeds
more than + 5 or – 5 degrees, other complicating
factors could be affecting normal operation of
the Model 1104. Call Phonetics for technical
assistance.