Filter
Top Products
Personalising your telephone26
Personalising your
telephone
You can personalise certain features of your telephone using
menu mode
.
Entering menu mode
Press the R key on the handset.
The
M
symbol is displayed and will stay on as long as you are in
menu
mode
. The first menu option,
PHONEBOOK
will be shown on the display.
To quit menu mode, press R once more or press t.
Setting the dial mode
This option sets the way your telephone sends numbers to the telephone line. You
can choose one of two dial modes (TONE or PULSE).
Press
R to enter menu mode.
Press
-
until you reach
BASE SETUP.
Press o until TONE or PULSE is displayed.
Press +
or
-
to switch between the two modes.
Press
o.
Your handset beeps to indicate that the dial mode has been changed.
Press R to leave menu mode.
Note:
Although this equipment can use either loop disconnect or DTMF signalling, only
the performance of the DTMF signalling is subject to regulatory requirements for
correct operation. It is therefore strongly recommended that the equipment is set
to use DTMF signalling of access to public or private signalling emergency
services. DTMF signalling also provides faster call set up.
1
2
1
2
3
4
5
6
Tip
You can change the dial mode from PULSE to TONE during a call
by pressing
*. The dial mode will return to PULSE after the call.