Filter
Top Products
Using your Xalio Vox10
Answering a call
When someone calls you, the base station and the handset ring, the
t
symbol
blinks on the handset display and the green light on the base station flashes.
Press the
t key on the handset or simply lift it off the base station.
The
t
symbol stops blinking and the call duration is displayed. The green
light on the base station blinks regularly to indicate that a call is in progress.
You can also press
H
. The handset loudspeaker is activated and you can
take the call.
To hang up, press
t
or replace the handset on the base station.
The call duration is displayed for 2 seconds.
Redialling the last number called
Direct redial
Press the
t key on the handset.
Wait for the dial tone.
Press the key on the handset.
The last number called is shown on the display and dialled automatically.
Redial with number correction
Press the key on the handset.
The last number called is shown on the display. You can use the
-
key to
make corrections by cancelling the last digit entered.
Press the
t key on the handset.
Adjusting sound volume
Adjusting the handset earpiece volume
You can adjust the earpiece sound volume during a call by pressing
+
or
-
.
You can choose from 3 possible sound levels. The sound level you have selected
will be set for your next calls.
Adjusting the base station ringer volume
You can adjust the volume of the base station ringer when the base station is
ringing.
You adjust the sound volume by pressing the button on the base station. There
are 4 possible volume levels. At the lowest level, the base station will not ring.
1
2
1
2
3
1
2