Filter
Top Products
Using your Xalio Vox 9
Using your Xalio Vox
Making a call
Direct dialling
Press the t
key on the handset.
The
t
symbol is shown on the display and you hear the dial tone in the
handset earpiece.
Dial the number using the number keys.
The number called is displayed for 10 seconds after the last key is pressed,
then is replaced by a timer showing the duration of your call.
If the number you enter is longer than 10 digits, the display will scroll the
number to the left to show the last digits.
To hang up, press
t
or replace the handset on the base station.
The duration of your call in minutes and seconds is displayed for 2 seconds.
Dialling with number preparation
This way of dialling allows you to make corrections to the number before dialling.
Dial the number before pressing the
t key. You can use the - key to
make corrections by cancelling the last digit entered.
If the number you enter is longer than 10 digits, the display will scroll the
number to the left to show the last digits.
Press the t
key on the handset.
The number prepared is automatically dialled.
The
t
symbol will be displayed, followed by the call duration after 10 seconds.
You can also press
H
. The handset loudspeaker is activated and the number
is dialled.
To hang up, press t
or replace the handset on the base station.
The call duration is displayed for 2 seconds.
1
2
3
1
Tip
If you want to see the whole number you have dialled so far, press
o
. The number will scroll to the left if it is longer than 10 digits.
2
3