Filter
Top Products
Function: Code You hear:
Playback
new messages
13
message(s)
Playback of all messages 14 message(s)
Next message
#
message(s)
Previous message
*
message(s)
Erase current message 2 message(s)
End playback 0
Playback ADAD announcement 15 ADAD announcm.
Playback info text 16 info text
Playback announcement text 1 17 announcem. text 1
Playback closing text 18 closing text
Playback announcement text 2 19 announcem. text 2
Erase all heard messages
24
Erase all ADAD messages 25
Erase info text 26
Erase announcement text 1 27
Erase closing text 28
Erase announcement 2 29
Record ADAD announcement 35 request tone
Record info text 36 request tone
Record announcement text 1 37 request tone
Record closing text 38 request tone
Record announcement text 2 39 request tone
Terminate recording 0
52 B – Answering device: 4 Remote control / remote polling
4.3 Initiating remote control (answering device is switched on)
4.2 Remote switch on of a switched off answering device
Subsequently: Enter the codes for the individual remote control operations
(see list).
After approx.
Tel. number
90 seconds:
Request tone Square key PIN Square key Positive
enter ACK tone
Subsequently:
Code for switch on Pos. ACK tone Announc. text(s)
Enter Announce., entry Square key PIN Square key Pos
tel. number must start ACK tone
4.4 Codes for remote operation
In the following table the right hand column lists what you will hear after the
input (texts, tones etc.).
To be able to use remote control and VIP functions, the PIN and VIP
codes must be different.
Important
note
• to switch on your AD from remote, you have to record the announce-
ments first.
• switching the operating mode to ”announce 1 + closing with change-
over to announce 2”. When no recording space is available, then you
switch off the ADAD-function.
53B – Answering device: 4 Remote control / remote polling
Notice