Filter
Top Products
23
22
Next character: After a character has been selected, press the key for the
next character.
Pressing the cursor right key shifts the input marker one place to the right:
You can now select another character. Pressing the right cursor key again
generates a blank.
Delete character: press left cursor key
Selecting
characters:
Example key 2
Example: Input-
ting of a name
4.2 Entering characters
Letters, punctuation marks and numbers are available as characters. Entry is
performed using the number keys. Every key has several characters
allocated to it. These are printed on the unit’s housing.
The current input position is indicated by a flashing square.
Entry of texts (names) is, for example necessary in the case of the
”telephone directory” and ”message” functions. Text input is possible if
”
” is displayed in the 2nd line.
In many programming operations, digits also have to be entered (in display
e. g. ”
”). Digits and letters can be deleted using the left cursor key (in
display ”
“).
– – –
(the digit of the key follows the last
letter of the key
) – (the 1st character appears again)
Name ”OTTO”: – – -
A – Telephone operation: 4 Comfort functions
The entry is deleted automatically after a successful call.
( )
- –
select entry - confirm
more -
confirm call back - telephone number is dialed
Selecting a telephone number from the call list
A – Telephone operation: 4 Comfort functions
Programming the telephone directory
Alternatives
4.3 Telephone directory
Using the telephone directory
The integrated telephone directory has 20 memory locations for entering
telephone numbers with names. If a caller is stored there with his/her
name, this is displayed to you in the case of a call (applies to calls with
transfer of the telephone number). The telephone can be called in the follo-
wing conditions: In idle condition, in ready-to-dial condition or during a call.
Before lifting the handset: Correcting the telephone number
After selecting an entry: Confirm the
using the
O.K. key:
The telephone number can be corrected
(deletion using the left cursor key).
You can add further digits. Dialing is performed after lifting the handset or
after switching on open listening / hands-free operation.
Dialing a telephone directory number in ready-to dial condition
After lifting the handset or after switching on open listening / hands-free
operation, select the desired entry from the telephone directory. Confirm
with the O.K. key: The telephone number is dialed.
You can add further digits.
During selection, the name keys programmed with telephone numbers are
displayed in addition to the entries in the telephone directory. It is thus
possible to make a selection out of a maxium of 40 entries.
Viewing
entries
Autodialing
telephone
numbers
- – -
Select memory location (name display):
Enter the fisrst letter of the name using the keyboard (4.2)
Or:
View memories one after the other using the cursor keys
View telephone number
Once you have selected the desired entry:
Telephone number is dialed after lifting the handset
New entry
- -
-
Enter name (see 4.2; entry absolutely necessary) -
Enter telephone number -