Filter
Top Products
1.5 Making Call Features
72 Feature Guide
1.5.3 Intercom Call
Description
An extension user can call another extension user.
Conditions
• Extension Number/Name Assignment
Extension numbers ( Extension Number [003]) and names ( Extension Name [004])
are assigned to all extensions. The assigned number and name are shown on display PTs
during intercom calls.
• DSS Button
It is possible to access another extension with one-touch by pressing the corresponding
Direct Station Selection (DSS) button. A flexible button can be customised as a DSS
button.
• Call Directory—Extension Dialling
Display PT users can make a call by selecting stored names on the display.
• Alternate Receiving—Ring/Voice
A PT user can select to receive intercom calls by ring tone or by voice, through personal
programming (Alternate Receiving—Ring/Voice). If a user selects voice-calling, the calling
party talks to the user immediately after a confirmation tone. Denying voice-calling can
also be selected.
• Alternate Calling—Ring/Voice
A caller can change the called party’s preset call receiving method (ring tone or voice). By
doing so, ring-calling is switched to voice-calling, or vice versa, at the called party. The
called party may deny voice-calling.
• Tone after Dialling
After dialling an extension number, a user will hear one of the following:
Feature Guide References
1.19.2 Flexible Buttons
User Manual References
User Manual
1.2.1 Basic Calling
1.2.6 Alternating the Calling Method (Alternate Calling—Ring/Voice)
1.11.2 Using the Directories
3.1.2 Settings on the Programming Mode
Type Description
Ringback Tone Indicates the called party is being called.
Confirmation Tone Indicates the called party has set voice-calling.
Busy Tone Indicates the called party is busy.
DND Tone Indicates the called party has set DND.