Filter
Top Products
2.2 System Configuration—Software
Feature Guide 287
2.2.3 Tenant Service
Description
This PBX can be shared with certain number of tenants.
1. Tenant Configuration
1.1 Tenant Member
The tenant members consist of user groups. One user group can belong to only one
tenant. Therefore, one extension can belong to only one tenant.
( 2.2.2 Group)
1.2 Time Service
Each tenant has a Time Table. The Start and/or End time of each time mode (day/
lunch/break/night) can be set for each day of the week. The Time Table numbers
correspond to the tenant numbers respectively.
( 2.2.4 Time Service)
[Example]
2. System Management
Each of the following system management items can be assigned to each tenant.
a) Tenant Operator (extension number/floating extension number of incoming call
distribution group/none) ( 2.2.5 Operator Features)
b) ARS Mode (Off/Local Access/All Access/System) ( 1.9.1 Automatic Route
Selection (ARS))
c) Music Source for Music on Hold (System/BGM Number/Cyclic Tone)
( 1.12.4 Music on Hold)
Tenant 1
Use Time Table 1
User Group 1
User Group 2
User Group 3
User Group 4
Tenant 2
Use Time Table 2
User Group 5
User Group 6