Filter
Top Products
1.10 Conversation Features
Feature Guide 127
Conditions
[APT + SLT]
• If one telephone goes off-hook while the other is on a call, a three-party call is established.
If one user goes on-hook, the other user continues the call.
• An extension user cannot originate a call from the SLT if the APT is:
• The SLT will always ring for incoming calls (if its ringer is turned on). It cannot be
programmed to not ring.
[DPT + SLT]
• When in the parallel mode, the XDP mode of the Super Hybrid port should be off through
system programming.
• Whether the SLT rings for incoming calls is programmable.
Ring on: Both telephones ring except when the PT is in Hands-free Answerback mode
( 1.4.1.4 Hands-free Answerback) or voice-calling mode (Alternate Receiving Ring/
Voice) ( 1.5.3 Intercom Call).
Ring off: Only the PT rings. However, the SLT can answer the call.
• If one goes off-hook while the other is on a call, the call is switched to the former. However,
the call will not be switched in one of the following conditions:
a) While being monitored by another extension. ( 1.5.3 Intercom Call)
b) While receiving OHCA ( 1.7.4.3 Off-hook Call Announcement (OHCA)) or Whisper
OHCA. ( 1.7.4.4 Whisper OHCA)
c) During a Conference call ( 1.13.1 Conference Features).
d) While Live Call Screening (LCS) or Two-way Record is activated ( 1.23.3 Voice Mail
DPT (Digital) Integration).
Wireless
XDP Parallel
Mode
For this connection, refer to the Wireless XDP
Parallel mode feature. ( 1.24.5 Wireless XDP
Parallel Mode)
– playing background music (BGM)
– receiving a paging announcement over the built-in speaker.
Features Descriptions Connections
PBX
PS
PT
APT/DPT/SLT + PS
PS
SLT
Extn. 101
Extn. 101
Extn. 102
Extn. 102