Filter
Top Products
1.17 Caller ID Features
160 Feature Guide
1.17 Caller ID Features
1.17.1 Caller ID
Description
The PBX receives caller’s information, such as the caller’s name and telephone number, on
trunks assigned to receive Caller ID. A display PT user can see the information.
The PBX can modify the received number according to preprogrammed tables so that he can
call back or memorise it. For example, if the area code is sent and it is not required to return
the call, store the area code in the table so that the area code is deleted automatically.
Caller ID to SLT Port (KX-TDA15/KX-TDA30 only):
An SLT user can also see the caller’s information. This feature is available only for SLTs
compatible with FSK type Caller ID.
Note
This feature complies with ETSI (European Telecommunications Standards Institute) type
FSK and Bellcore type FSK.
1. Features
Caller ID includes the following features:
Feature Description Details in
Caller ID (KX-
TDA30/KX-TDA100/
KX-TDA200 only)
Caller’s information which is sent from
an analogue trunk.
The following Caller ID signalling types are
supported: FSK and DTMF.
–
Calling Line
Identification
Presentation (CLIP)
Caller’s information which is sent from
an ISDN line.
• 1.20.1.2
Calling/
Connected Line
Identification
Presentation
(CLIP/COLP)
Automatic Number
Identification (ANI)
(KX-TDA100/KX-
TDA200 only)
Caller’s information which is sent from
an E1 or T1 line.
• 1.21.1 E1 Line
Service (KX-
TDA100/KX-
TDA200 only)
• 1.22.1 T1 Line
Service (KX-
TDA100/KX-
TDA200 only)