Filter
Top Products
1.5 Making Call Features
Feature Guide 83
1.5.5.2 Line Preference—Outgoing
Description
A PT user can select the outgoing line he prefers to originate calls on, from the following line
preferences, through personal programming (Preferred Line Assignment—Outgoing):
Conditions
• Line Preference Override
A user can override the preset Line Preference temporarily by pressing the desired Line
Access button or Memory Dialling button (e.g., One-touch Dialling) before going off-hook.
• To select Idle Line Preference, the trunk groups available to the extension should be
programmed on a COS basis ( Trunk Group Number [500]). Also trunk groups available
for Idle Line Access should be assigned ( Idle Line Access (Local Access) [103]).
User Manual References
User Manual
3.1.2 Settings on the Programming Mode
Feature Description
Intercom When an extension user goes off-hook, an extension line is selected
automatically.
Idle Line When an extension user goes off-hook, an idle trunk is selected
automatically from the assigned trunk groups.
No Line When an extension user goes off-hook, no line is selected. He must
select the desired line to make a call.
Prime Line When an extension user goes off-hook, the preset line is selected
automatically. A prime line can be selected from the Line Access
buttons: S-CO, G-CO, L-CO, ICD Group.