Filter
Top Products
1.23 Voice Mail Features
Feature Guide 207
call will be redirected to the destination, assigned on the trunk group which receives the
call, by the Intercept Routing feature.
Conditions
[General]
• It is possible to call an extension (extension port) in a VM group directly. If the calls are
routed directly to the extension in the group, it is possible to enable some features (e.g.,
FWD, Idle Extension Hunting) on the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available
on the extension.
• One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialling button for direct access to a Voice Mail feature.
( 1.6.1.2 One-touch Dialling) For example, to access a mailbox (mailbox number 123)
of the VPS (extension number 165) directly, assign "165
#6123" to a One-touch Dialling
button. When pressing this button, the outgoing message (OGM) of the mailbox will be
heard.
[KX-TDA100/KX-TDA200]
• All ports in a VM (DPT) group must be connected to a single DHLC or DLC card.
[KX-TDA15/KX-TDA30]
• All ports in a VM (DPT) group must be connected to either the same DLC card, or to the
preinstalled Super Hybrid ports.
Feature Guide References
1.23.2 Voice Mail DTMF Integration
1.23.3 Voice Mail DPT (Digital) Integration