Filter
Top Products
1.17 Caller ID Features
Feature Guide 161
2. Service Features
3. Number/Name Assignment
3.1 Automatic Caller ID Number Modification
This PBX automatically modifies the incoming caller’s number according to
preprogrammed tables. The modified number will be recorded for calling back.
The PBX supports a number of modification tables, and each trunk group can select
a table for use. Each table has ten locations for local/international calls and one for
long distance calls.
The PBX checks the local/international call data first. If a match is not found, the long
distance call data is applied.
[Example]
Note
When caller’s information is sent through an ISDN line and the call type is Subscriber,
National, or International, the following modification table is used instead of the above
table:
Features Description Details in
Calling Line
Identification (CLI)
Distribution
Directs a DIL/DID/DDI/MSN call to a CLI
destination if the caller’s identification (Caller
ID/CLIP/ANI) has been assigned to the Caller
ID Table.
• 1.1.1.5 Calling
Line
Identification
(CLI)
Distribution
Incoming Call Log Caller’s information is automatically recorded
in the call log of the called extension. This
information is used for confirming the caller,
calling the caller back, and/or storing the
number and name in the Personal Speed
Dialling.
• 1.17.2
Incoming Call
Log
012
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance Call
Data 1
Area Code
Removed No. of Digits
Added No
.
Trunk
Group No.
1
2
:
Modification
Table
1
3
:
Modification Table 1
00
:
Not
programmable
3
2
0
:
001
:
Blank
0
<Table Selection>
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
Removed No. of Digits
Added No.
<Modification Table>
0
0
0
Blank
0
00