Filter
Top Products
1.24 Portable Station (PS) Features
220 Feature Guide
1.24 Portable Station (PS) Features
1.24.1 Portable Station (PS) Connection
Description
This PBX supports the connection of a PS (e.g., KX-TD7590, KX-TD7690). It is possible to use
the PBX features using the PS like a PT.
Conditions
• The PS registration is required through the system programming ( PS Registration
[690]). To avoid unexpected registration to another PBX, the Personal Identification
Number (PIN) for the PBX is necessary to register a PS ( Personal Identification
Number (PIN) for PS Registration [692]). The registration can be cancelled ( PS
Termination [691]).
• Handover
Even if a PS user moves during a conversation, the PS will automatically switch between
cells without disconnecting the call (Handover).
Handover is available in any of the following cases:
a) During a conversation with an extension or outside party.
b) While a call is ringing at the PS.
c) While the PS is in idle status.
On the contrary, Handover is not available in one of the following cases:
a) When the new (Handover) CS is busy.
b) When there is no CS within range.
c) While the Live Call Screening (LCS) or Two-way Record is activated ( 1.23.3 Voice
Mail DPT (Digital) Integration).
d) While the PS user is paging other extensions ( 1.14.1 Paging).
e) During a doorphone call ( 1.16.1 Doorphone Call).
f) While the PS user is dialling digits to make a trunk call.
g) During a conversation with an extension using PC Console or PC Phone, to which the
conversation is being recorded.
• When a caller has dialled the extension number of a PS but the CS is busy, the caller hears
a busy tone.
PBX
CS
Handover:
Calls will not be
disconnected.
CS
CS
Interface