Peerless Industries KX-TDA100 IP Phone User Manual


 
1.16 Optional Device Features
154 Feature Guide
Note
DISA AA service and Operator Call ( 2.2.5 Operator Features) are available for any
security mode.
Security Mode Override:
If the caller operates with the following features while hearing a DISA message, the security
mode can be changed to the No Security mode temporarily:
Walking COS ( 1.8.5 Walking COS): Walking COS feature number + extension
number + extension personal identification number (PIN)
Verified Code Entry ( 1.8.6 Verified Code Entry): Verified Code Entry feature
number + + verified code + verified code PIN
After changing mode, the mode remains in force for the duration of the call.
Available PBX Features with Security Mode Override:
After Security Mode Override is done with the Walking COS feature, the following features are
available (It regards a remote operation from the assigned extension [ 1.26.5 Remote
Extension Control by User]):
•FWD
DND
Log-in/Log-out ( 1.2.2.6 Log-in/Log-out)
Absent Message ( 1.18.2 Absent Message)
Extension Lock ( 1.8.3 Extension Lock)
Time Service Switching Mode ( 2.2.4 Time Service)
DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy
destination does not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is
in DND mode and Idle Extension Hunting is not available, one of the following can be selected
through system programming:
a) Busy Tone: Busy tone is sent to the caller.
Security
Mode
Intercom
Call
TIE Line Call
Trunk Call
Without PBX
Code
With PBX
Code
All
Security
Trunk
Security
No
Security
*
:
Available
*
:
If trunk call is available, Account Code Entry ( 1.5.4.3 Account Code Entry) is also
available.