Filter
Top Products
1.19 Proprietary Telephone (PT) Features
Feature Guide 175
Conditions
• The Flexible DSS button lights of the KX-T7040 and KX-T7240 shows only "Off" or "Red
On". If the button is customised as a button which shows other light patterns, the other light
patterns also show only as "Red On".
Call Log Used to show the incoming call information.
Log-in/Log-out * Used to switch between the log-in and log-out mode.
Hurry-up Used to redirect the longest waiting call in the queue of an
incoming call distribution group to the overflow destination.
Wrap-up * Used to switch the Wrap-up/Not Ready and Ready modes.
System Alarm Used to confirm a PBX error.
Time Service * Used to switch the assigned time modes: day, lunch, break or
night. Also used to check the current time mode status.
Answer Used to answer an incoming call.
Release Used to disconnect the line during or after a conversation, or
to complete a Call Transfer.
Toll Restriction/Call Barring Used to change the TRS/Barring level of other extension
users temporarily.
ISDN Service Used to access an ISDN service.
Calling Line Identification
Restriction (CLIR) *
Used to switch between the CLIP and CLIR service.
Connected Line
Identification Restriction
(COLR) *
Used to switch between the COLP and COLR service.
ISDN Hold Used to transfer a call using the telephone company.
Headset Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset
modes during a conversation.
Time Service Switching
Mode (Automatic/Manual) *
Used to switch between the Automatic Switching and Manual
Switching mode.
Two-way Record Used to record a conversation into your own mailbox.
Two-way Transfer Used to record a conversation into the mailbox of a specified
extension.
One-touch Two-way
Transfer
Used to record a conversation into the mailbox of a specified
extension with one-touch.
Live Call Screening (LCS) Used to monitor your own voice mailbox while an incoming
caller is leaving a message and, if desired, intercept the call.
Voice Mail (VM) Transfer Used to transfer a call to the mailbox of a specified extension.
*: One-touch Feature Setting Buttons: Pressing these buttons while on-hook changes the
feature settings. The new mode will be displayed for a preprogrammed time period.
Button Usage