Filter
Top Products
2.1 System Configuration—Hardware
282 Feature Guide
2.1 System Configuration—Hardware
2.1.1 Extension Port Configuration
Description
There are three types of extension ports as follows:
a) DPT Port: DPT, DSS Console, Panasonic VPS (KX-TVS/TVP series [DPT (Digital)
Integration]), or PT-interface CS (e.g., KX-TDA0141) can be connected.
b) SLT Port: SLT or KX-TVS/TVP series (DTMF Integration) can be connected.
c) Super Hybrid Port: DPT, APT, SLT, DSS Console, KX-TVS/TVP series, or PT-
interface CS can be connected.
EXtra Device Port (XDP) of Super Hybrid Ports:
A DPT and SLT can be connected to one Super Hybrid port (TR: SLT, HL: DPT). In this case,
the SLT port (TR) of the Super Hybrid port can be used as an XDP port to connect an SLT as
a sub telephone. There are two modes for the XDP port as follows:
Conditions
• Automatic Detection on Super Hybrid Port
A DPT, APT, SLT, or PT-interface CS can be connected to a Super Hybrid port without
programming.
• A DSS Console or a VPS (Panasonic KX-TVS/TVP series [DPT (Digital) Integration]) can
also be connected with an SLT in XDP mode.
• APT and SLT in Parallel Mode
An APT and an SLT can also be connected to a Super Hybrid port and used in parallel
mode.
• Digital XDP
A DPT can be connected to another DPT and act as a completely different extension. (
1.10.9 Parallelled Telephone)
• Wireless XDP Parallel Mode
A PS can be used in parallel mode with a wired telephone.
( 1.24.5 Wireless XDP Parallel Mode)
• DSS Console and Paired Telephone Assignment
When a DSS Console is connected, a paired extension must be assigned through system
programming ( Console Paired Telephone [007]). Only a PT can be a paired extension.
Mode Description
Parallel Mode The DPT and SLT have the same extension number so that they
can act as one extension. They use the main telephone’s (DPT’s)
extension data (e.g., extension number, COS).
( 1.10.9 Parallelled Telephone)
XDP Mode The DPT and SLT have different extension numbers so that they
can act as completely different extensions. To use XDP mode,
XDP mode must be enabled (on) the port through system
programming ( EXtra Device Port (XDP) Mode [600]).