Peerless Industries KX-TDA100 IP Phone User Manual


 
1.24 Portable Station (PS) Features
Feature Guide 227
1.24.5 Wireless XDP Parallel Mode
Description
A PS can be used in parallel with a wired telephone (PT/SLT). In this case, the wired telephone
is the main telephone and the PS is the sub telephone. When Wireless XDP Parallel Mode is
enabled, the two telephones share one extension number (main telephone’s extension
number) like XDP Parallel mode for a DPT and an SLT.
Conditions
If one of the telephones goes off-hook while the other telephone is on a call, the call is
switched to the telephone going off-hook. However, the call is not switched in one of the
following conditions:
a) During a Conference call ( 1.13.1 Conference Features).
b) While Live Call Screening (LCS) or Two-way Record is activated ( 1.23.3 Voice Mail
DPT (Digital) Integration).
c) While receiving OHCA ( 1.7.4.3 Off-hook Call Announcement (OHCA)).
d) While being monitored by another extension ( 1.7.3 Call Monitor).
e) During Consultation Hold.
f) During a broadcasting call ( 1.15.1 Broadcasting (KX-TDA30/KX-TDA100/KX-
TDA200 only)).
(Consultation Hold: Allows an extension user to place a call on hold temporarily to
perform Call Transfer, Conference, or Call Splitting.)
Wireless XDP Parallel Mode can only be set from a PS. The wired telephone can accept
or deny this feature through COS programming ( Wireless XDP Parallel Mode for Paired
Telephone [515]). Once this feature is set, the setting at the wired telephone cannot be
changed unless a PS changes the setting.
DPT
Cell Station
Wireless Phone
Super
Hybrid
Port
PBX
XDP Parallel Mode
Wireless XDP
Parallel Mode
Extn. 102
PT/SLT
PS
Extn. 103