Filter
Top Products
2.2 System Configuration—Software
284 Feature Guide
2.2.2 Group
Description
This PBX supports various types of groups.
1. Trunk Group
Trunks can be grouped into a specified number of trunk groups (e.g., for each carrier, trunk
type, etc.) ( LCOT/BRI Trunk Group Number [402]). Several settings can be assigned
on a trunk group basis. All trunks belonging to a trunk group follow the assignment
determined for that trunk group.
One trunk can belong to only one trunk group on a port or channel basis.
Port basis: LCOT/DID/E & M/ISDN-BRI/ISDN-PRI23/ISDN-PRI30
Channel basis: E1/T1
2. User Group
The PBX supports user groups ( User Group [603]), each of which is used to compose
the following groups:
a) Tenant ( 2.2.3 Tenant Service)
b) Call Pickup Group (See below.)
c) Paging Group (See below.)
Every extension must belong to one user group, but cannot belong to more than one user
group.
Assignable Extensions: PT/SLT/PS/ISDN Extension/T1-OPX
[Example]
2.1 Call Pickup Group ( User Groups of a Pickup Group [650])
Using the Group Call Pickup feature, extensions can answer any calls within a
specified group. One user group can belong to several call pickup groups.
( 1.4.1.3 Call Pickup)
[Example]
User Group 1
Extn. 100 Extn. 101
User Group 2
Extn. 102 Extn. 103
User Group 3
Extn. 104 Extn. 105
User Group 4
Extn. 106 Extn. 107
User Group 1
Call Pickup Group 1
Extn. 100 Extn. 101
User Group 2
Extn. 102 Extn. 103
User Group 3
Extn. 104 Extn. 105
Call Pickup Group 2 Call Pickup Group 3
User Group 4
Extn. 106 Extn. 107