Filter
Top Products
27
Browser Operation
Confirming quick operation
settings
This button is used to confirm the operation settings that
were set by touching the
(Quick Operation button)
on the Center Module. This setting can be changed through
operations on the Center Module.
To display this screen, click the [Quick] button in the Setup
menu panel.
[Speed team]
Displays the Speed team settings.
OFF: No Speed team operation.
ON: The vehicle detectors are shut off and Speed team
operation is in effect.
[Cross beep] (WX-CC412 only)
Displays the Cross beep settings.
OFF: A beep tone is only heard when the vehicle detector of
the corresponding lane for the All-In-One Headset or
Belt Pack is ON.
ON: A beep tone is also heard when the vehicle detector of
the other lanes in addition to the corresponding lane
for the All-In-One Headset or Belt Pack are ON.
Lane A setting
Lane B setting (WX-CC412 only)
[V/Det override]
Displays the V/Det override settings.
OFF: Vehicle detectors turn ON when a vehicle approaches.
ON: The vehicle detectors are virtually ON.
Backing up settings
This tab is used to back up Center Module settings and
messages.
To display this screen, click the [Backup] button in the Setup
menu panel.
[Execute] button
This button is used to back up Center Module settings and
message voice source files to the PC.
Data that has been backed up is extracted to the
following folder on the SD card. When restored on the
Center Module, the settings can be restored to those
used at the time of backing up.
SD card route:
\PRIVATE\PANA_GRP\PSN\DWCS\BACKUP
Message voice source files cannot be backed up if an
SD card is not inserted.
Note
WX-CC411_PGQP1741ZA_BG_en.indd 27 2014/01/17 15:17:44