Filter
Top Products
19
Browser Operation
Configuring and confirming
settings for each lane
This tab is used to configure and confirm settings for each
lane.
To display this screen, click the [Lane] button in the Setup
menu panel.
To configure and confirm settings for Lane B, click the
[Lane B] tab. (WX-CC412 only)
[Input volume (0-20)]
Displays the input volume for each All-In-One Headset
and Belt Pack and the order post speaker. The volume
range is from 0 to 20. This setting can be changed through
operations on the Center Module.
Outside mic: Displays the volume of the order post
microphone.
Aux mic:
Displays the volume of the kitchen microphone.
Line in: Displays the volume of the line input.
Beep: Displays the volume of the beep tone.
[Output volume (0-20)]
Displays each output volume. The volume range is from 0 to
20. This setting can be changed through operations on the
Center Module.
Outside speaker: Displays the volume of the order post
speaker.
Aux speaker: Displays the volume of the kitchen
speaker.
Line out:
Displays the volume of the line output.
[Aux speaker (0-20)]
Displays the input sound source file and the volume of the
file to be output to the kitchen speaker. This setting can be
changed through operations on the Center Module.
Outside mic ON/OFF Displays whether or not the voice of the
order post microphone will be output to
the kitchen speaker.
Volume
Displays the volume of the order post
microphone output to the kitchen speaker.
Headsets TALK Displays whether or not the [TALK]
voice from the All-In-One Headsets or
Belt Packs will be output to the kitchen
speaker.
PAGE Displays whether or not the [PAGE]
voice from the All-In-One Headsets or
Belt Packs will be output to the kitchen
speaker.
Volume Displays the volume of the voice from
the All-In-One Headsets or Belt Packs to
be output to the kitchen speaker.
AUX mic (ON/OFF) Displays whether or not the voice of the
kitchen microphone will be output to the
kitchen speaker.
Beep ON/OFF Displays whether or not the beep tone
will be output to the kitchen speaker.
Volume Displays the volume of the beep tone
output to the kitchen speaker.
[Device for Line in]
Displays the output destination for line input. Line input will
be output to all All-In-One Headsets or Belt Packs and the
kitchen speaker.
You can change the output device for [LINE IN].
For details, contact the store where you purchased this unit.
[Source for Line out]
Displays the input sound file source for line output. The
output destination for the line sound source file will be the
same as that of the sound source file output from the order
post speaker.
You can change the audio source for [LINE OUT].
For details, contact the store where you purchased this unit.
WX-CC411_PGQP1741ZA_BG_en.indd 19 2014/01/17 15:17:41