Filter
Top Products
16
Browser Operation
Setting Help contact [Help contact]
This tab is used to check the telephone number and
configure the email transmission settings for the Help
contact screen displayed on the LCD display of the Center
Module.
Click the [Installation] button, then the [Help contact] tab.
[Telephone]
This field displays the telephone number. This setting can be
changed through operations on the Center Module unit.
Configuring Help contact email transmission
settings
This area is used to configure the email to be sent from the
LCD display Help contact screen.
[Destination E-mail address]
Set the destination email addresses. The same message
can be sent to up to 5 email addresses.
Number of characters: 3 to 128
Types of characters: alphanumeric, characters @ . _ -
[E-mail subject]
Input the subject of the email.
Number of characters: 0 to 50
[E-mail body]
Input the body of the email.
Number of characters: 0 to 200
The SMTP server must be set before an email can be
sent. To set the SMTP server, click the [Installation]
button, then the [Server] tab.
The following substitute characters can be used in the
email body. The substitute characters will be replaced
with the corresponding character string when the
email is sent.
Note
Substitute
characters
Character string after substitution
%d% Help contact email sent date
e.g. 05
%M% Help contact email sent month (alphabetical
character)
e.g. Feb
%m% Help contact email sent month (numerical
character)
e.g. 02
%Y% Help contact email sent year (four-digit)
e.g. 2014
%y% Help contact email sent year (the last two digits)
e.g. 14
%t% Help contact email sent time
e.g. 15:00:00
%i% IP address of the Center Module
%s% Information entered in Site information
When using the Help contact email function, confirm
that emails can be sent correctly in advance when the
unit is installed.
Important
Setting Site information [Site info.]
This tab is used to input information particular to the store
in which the unit is installed, such as the contact number for
the store and management information. This information is
used when viewing store information from a browser. This
information can only be set and viewed with a browser.
Click the [Installation] button, then the [Site info.] tab.
Number of characters: 0 to 200
WX-CC411_PGQP1741ZA_BG_en.indd 16 2014/01/17 15:17:39