Filter
Top Products
74
Troubleshooting
Problem
You cannot page the
handset or base unit.
You cannot redial by
pressing
(PAUSE/REDIAL)
on the handset or
(REDIAL/PAUSE) on the
base unit
.
“Recharge battery” is
displayed, “” flashes
or the handset beeps
intermittently.
“Charge for 15HRS” and
“” are displayed and
the handset does not work.
You charged the battery
fully, but “Recharge
battery” is still displayed
and/or “” continues to
flash, or “Charge for
15HRS” and “” are
displayed.
The CHARGE indicator
light does not go out after
the battery has been
charged.
Cause & Remedy
•The called handset is too far from the base
unit.
•The called unit is in use. Try again later.
•If more than 3 other users are using the
handsets and base unit, you may not be able
to page. Try again later.
•If the last number dialed was more than
32 digits long, the number will not be redialed
correctly.
•The button has a double function as either
redial or pause. It will redial the last number
dialed if pressed at the outset of a call (p. 24,
27). If another number has been dialed first, it
will operate as a pause button (p. 59).
•Charge the battery fully (p. 13).
•The battery has been discharged. Charge the
battery fully (p. 13).
•Clean the charge contacts and charge again
(p. 13).
•Install a new battery (p. 66).
•This is normal.