Filter
Top Products
57
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Listening to Voice Mail Messages
After the voice mail box having received messages, the unit will indicate it
in two ways: (a) “Voice mail” displayed on the handset, and (b) “”
on the handset and the VM indicator on the base unit will flash. To listen
to your voice mail message(s), follow the steps below.
Handset
1
Press the right soft key ( ), and press
or .
•
The handset is connected to the telephone line
and dials the access number (p. 55).
2
Follow the pre-recorded instructions.
3
When finished, press (OFF).
•
If “Store VM access#” is displayed and 3 beeps sound, store the number (p. 55).
Base unit
1
Press (VM).
•The base unit is connected to the telephone line and dials the access
number (p. 55).
2
Follow the pre-recorded instructions.
3
When finished, press (DIGITAL!SP-PHONE).
•If 3 beeps sound in step 1, you have not stored the voice mail access number. Store
the number (p. 55).
•If “Voice mail” still remains on the handset,
“” on the handset
or the VM
indicator on the base unit still flashes even if you have listened to your voice mail
message(s), press (CONF/FUNCTION), and press and hold (HOLD/CLEAR) until
the unit beeps. “Voice mail” will disappear,
“”will stop flashing
and the
VM indicator will turn off.
•If your voice mail service uses a voice mail tone and the recorded message is
over 3 minutes long, “Voice mail” may not be displayed,
“ ”
and the VM
indicator may not flash.
•If your voice mail service uses a voice mail tone, the tone will be heard from any
parallel connected phone. If you use another phone to retrieve messages, you
have to dial your access number manually.
MAIL
MAIL
MAIL
MAIL
MAIL
Voice mail
Voice mail
MAIL