Filter
Top Products
53
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
To turn the 2-Way Radio mode on
Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “2Way radio mode” by pressing
Ö or Ñ.
3
Press á.
4
Select “On” by pressing Ö or Ñ.
5
Press the right soft key ( ).
•A beep sounds and the mode will turn on.
•You can exit the programming mode any time by pressing (OFF)
.
To turn the mode off:
Place the handset on the base unit or the charger.
•You can also turn the mode off by performing the three procedures: (1) press
(CONF/FUNCTION), (2) select “Off” by pressing Ö or Ñ, and (3) press the
right soft key ( ).
•“2Way radio mode” will disappear and the mode will turn off.
SAVE
SAVE
2-Way Radio Communication (When
the System Has Additional Handsets)
If you purchase one or more additional handsets (p. 21), you can use this
feature. A handset user can talk with another handset user regardless of
the base unit location. 2-Way Radio communication, which is the direct
communication between a pair of handsets, does not need the base unit
interface.
You need to turn the mode on on the handsets.
Initial setting
H
2Way radio mode
---------------
2Way radio mode
:Off
GF
SAVE
2Way radio mode
:On
GF
SAVE
2Way radio mode
Once the mode is on, the handset can be used only to talk with another
handset, and the following features cannot be used on the handset:
– Making/answering external and internal calls
– Searching the Caller List or directory
– Programming
– Receiving Caller ID information
After finish using this mode, remember to turn the mode off. Otherwise
the battery operating time will be shortened (p. 13).