Filter
Top Products
59
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
FLASH Button
Pressing (FLASH/CALL!WAIT) also allows you to use special features of
your host PBX such as transferring an extension call or accessing special
telephone services (optional) such as call waiting.
•Pressing (FLASH/CALL!WAIT) causes to disable the Temporary Tone Dialing
mode or the mute (p. 58).
Selecting the flash time
The flash time depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110,
100 or 90 ms (milliseconds)”. Your phone comes from the factory set to
“700 ms”.
Make sure the base unit and the handset are not being used.
1
Press (CONF/FUNCTION), and scroll to “Initial setting” by
pressing Ö or Ñ, and press á.
2
Scroll to “Set tel line” by pressing Ö
or Ñ, and press á.
3
Scroll to “Set flash time” by pressing Ö
or Ñ, and press á.
•The current setting is displayed.
4
Select the desired time by pressing Ö or
Ñ.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
•If the unit is connected via a PBX, PBX functions (transferring a call etc.) might
not work correctly. Consult your PBX supplier for the correct setting.
SAVE
Set flash time
:700ms
GF
SAVE
Caller ID edit
H
Set tel line
Voice mail
Set dial mode
H
Set flash time
Set line mode
How to Use the PAUSE Button
(For PBX Line/Long Distance Calls)
We recommend you press (PAUSE/REDIAL) on the handset or
(REDIAL/PAUSE) on the base unit if a pause is required for dialing with a
PBX or to make a long distance call.
Ex. Line access number (9) (PBX)
(9) \ (PAUSE/REDIAL) or (REDIAL/PAUSE) \
•Pressing (PAUSE/REDIAL) or (REDIAL/PAUSE) once creates a 3.5 second
pause. This prevents misdialing when you redial or dial a stored number.
•Pressing (PAUSE/REDIAL)
or (REDIAL/PAUSE) more than once increases the
length of the pause between numbers.
Phone number