Filter
Top Products
67
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you need to register the
handset to a different base unit of the same model, it may be necessary to
cancel the registration. Only one handset can be canceled at a time near
the base unit.
Make sure the base unit and the handsets are not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
3
Scroll to “Registration” by pressing Ö
or Ñ, and press á.
4
Scroll to “Deregistration” by pressing
Ö or Ñ.
5
Press á.
6
Press (3)(3)(5) (DEL.) to delete the
registration memory.
•If you make a mistake, press (HOLD/CLEAR),
and enter “335”.
7
Press the right soft key ( ).
•A beep sounds and the registration memory will
be erased on both the handset and the base
unit.
•If 3 beeps sound, you entered a wrong code.
The display will return to step 6. Enter “335”.
•To register the handset to another base unit of
the same model, start from step 5 on page 68
or see page 21.
•
“[-]
”
is shown on the top right of the display.
•You can exit the programming mode any time by pressing (OFF)
.
•The handset will not work. To use it again, registration will be required (p. 21, 68).
OK
SP
PRIVACY
[
-
]
Handset [2]
DeDeregistered
Ex. Extension number 2
HS registration
H
Deregistration
---------------
Set base unit
H
Registration
---------------
Deregistration
Enter code:335
:---
Deregistration
Enter code:335
Enter codeee:335
OK
SP
PRIVACY
[
-
]
Press MUTE on
base unit, then
OK on handset to
register handset
OK
Copy directory
H
Initial setting
2Way radio mode