Filter
Top Products
Programmable Settings
20
Base unit
You can set the base unit ringer volume to HIGH, MEDIUM, LOW or OFF. If
set to OFF, the base unit will not ring for external calls, and for internal calls
it will ring at the LOW level. Your phone comes from the factory set to
HIGH. Make sure the base unit is not being used.
To select HIGH (preset), MEDIUM or LOW, press (RINGER/AUTO).
•Each time you press the button, the ringer volume will change and ring.
To turn the ringer OFF, press and hold (RINGER/AUTO) until 2 beeps
sound.
To turn the ringer ON, press (RINGER/AUTO).
•The ringer will sound at the LOW level.
•You can also select the ringer volume while an external call is being received.
Press (RINGER/AUTO), Ö or Ñ while the base unit is just ringing.
•You can change the ringer tone for external calls. See page 60.
LCD Contrast
You can program the handset LCD contrast (6 levels). Your phone comes
from the factory set to level 3. Make sure the handset is not being used.
1
Press (CONF/FUNCTION).
2
Scroll to “Initial setting” by pressing
Ö or Ñ, and press á.
3
Press á at “LCD contrast”.
4
Select the desired contrast by pressing Ö
or Ñ.
•Each time you press Ö or Ñ, the LCD
contrast will change.
•The number of steps shows the LCD
contrast level.
5
Press the right soft key ( ).
•A beep sounds.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by
pressing (OFF)
.
SAVE
---------------
H
LCD contrast
Auto talk
LCD contrast
Low High
GF
SAVE
LCD contrast
Low High
LCD contrast
Low High
Level 6
Level 4
Level 1
Copy directory
H
Initial setting
2Way radio mode