Filter
Top Products
Answering Intercom Calls
Handset
When an intercom call is being received, the
handset rings and the display shows the calling
extension.
Press , or (HOLD) (INTERCOM).
•You can also answer the call by pressing any dialing
button (0) to (9), (*) or (#) (Any Key Talk).
To end the intercom, press (OFF) or place the
handset on the base unit or the charger.
Base unit
When an intercom call is being received, the base unit rings and the
LOCATOR/INTERCOM/TRANSFER indicator light flashes.
Press (LOCATOR/INTERCOM/TRANSFER) or (DIGITAL!SP-PHONE).
•The LOCATOR/INTERCOM/TRANSFER indicator and the DIGITAL SP-PHONE
indicator light.
To end the intercom, press (DIGITAL!SP-PHONE) or
(LOCATOR/INTERCOM/TRANSFER).
•The LOCATOR/INTERCOM/TRANSFER indicator and DIGITAL SP-PHONE
indicator lights go out.
•When the ringer volume is off (p. 19, 20), the handset and base unit will ring at
the LOW level for internal calls.
•You cannot change the ringer tone for internal calls.
Ex. Base calling
Intercom
46
During an intercom call:
•If you have difficulty hearing the other party, decrease the speaker volume by
pressing Ö.
•If an incoming call is being received, you will hear two tones (incoming call
tone, p. 61) and the IN USE indicator on the base unit will flash quickly. To
answer, if you are using the handset, press (OFF) and press or . If
you are using the base unit, press (DIGITAL!SP-PHONE) twice.
•If the handset detects a problem, an error message will be displayed (p. 69).
SP
PRIVACY
[
1
]
Call from [0]
Intercom
01
MUTE