Filter
Top Products
If the Following Appear...
70
Display message
Cause & Remedy
When trying to store an item in the directory, the
directory memory is full. To erase other items from
the directory, see page 41.
• When the displayed item is being sent to the
destination handset, the directory memory is
full. The transfer is stopped. If you tried to send
all of the items, the item displayed with
“---Incomplete---” and items after it have
not been transferred to the destination handset.
You can press
(OFF) to exit the mode (p. 42,
43). To erase other stored items from the
destination handset directory, see page 41. You
can send all of the items again or send the
items which have not been transferred one by
one (p. 42, 43).
•
If the transfer is stopped for another reason,
“Directory full” will not display, for example:
–
the destination handset may be out of area, or
–
the destination unit user may press or .
Although you tried to send your directory items to
another handset, your directory is empty.
• W
hen you call the handset or base unit to
monitor, the Room Monitor mode of the
destination unit is set to
off (p. 51)
.
•
The called handset is on the base unit. The
handset must be off the base unit to be monitored.
When you tried to call another handset in the
2-Way Radio mode;
– the handset is too far from your handset. Walk
closer to the handset.
–
2-Way Radio mode on the handset is off (p. 53).
–
The called handset is talking with another
handset in the 2-Way Radio mode.
Directory
DirectFull
Directory
No items stored
Not found
2Way radio mode
Denied
---Incomplete---
Tom Jones
098-765-4321
Directory full
(The name/number is an
example.)