Filter
Top Products
8
Installation
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1BX.
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• The unit will not work during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using a T-adaptor.
• When more than one unit is used, the units may interfere with each other. To
prevent or reduce interference, please keep ample space between the base units.
* If the unit is connected to a telephone line with DSL service, you may hear noise
from the receiver or speaker during conversations or the unit may not display
caller’s phone number properly. We recommend connecting a noise filter (contact
your DSL service provider) to the telephone line between the unit and the
telephone line jack.
Fasten the cords.
To Single-Line Telephone Jack
Telephone
Line Cord
To Power Outlet
(AC 220–240 V,
50/60 Hz)
AC Adaptor
Hooks
* Noise Filter
(For DSL users)
PQQX14670ZA.book 8 ページ ２００５年２月２２日 火曜日 午後１２時０分