Filter
Top Products
Useful Information
53
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing [0]
to [9], and [*] instead of using the soft keys.
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
Menu item Command Selection items Page
Ringer volume [1] [1] [0] : Off [1] : Low [2] : Medium
[3] : High
p. 16
Ringer tone
(for handset)
[1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
p. 18
Incoming call tone
(for handset)
[1] [3] [1] : On [2] : Twice [0] : Off p. 45
Date and time [4] Go to Step 3 on page 13. —
Voice enhancer [5] [1] : On [0] : Off p. 22
Dial lock [6] Go to Step 3 on page 47. —
Talking Caller ID
(for handset)
[9] [1] : On [0] : Off p. 27
LCD contrast [0] [1] [1]–[6] : Level 1–6 p. 19
Key tone [0] [2] [1] : On [0] : Off p. 46
Auto talk [0] [3] [1] : On [0] : Off p. 15
Dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 14
Flash time [0] [5] [2] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
[5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
p. 44
Line mode [0] [5] [3] [1] : A [2] : B p. 14
Ringer tone
(for base unit)
[0] [*] [1] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
p. 19
Incoming call tone
(for base unit)
[0] [*] [2] [1] : On [2] : Twice [0] : Off p. 45
Talking Caller ID
(for base unit)
[0] [*] [4] [1] : On [0] : Off p. 27
Handset
PQQX14670ZA.book 53 ページ ２００５年２月２２日 火曜日 午後１２時０分