Filter
Top Products
Special Features
44
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press Pause or P if a pause is
required for dial with a PBX or to make a long distance call.
Ex. Line access number [9] (PBX)
[9] N Pause or P N
• Pressing Pause or P once creates a 3.5 second pause.
This prevents misdialing when you dial after confirming
the entered number (p. 21) or dial a stored number
(p. 35, 36).
• Pressing Pause or P more than once increases the length of the pause between
numbers.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the
mute (p. 43).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Set flash time” by pressing [
d
]
or [
B
], then press Select.
5 Select the desired time by pressing [
d
] or [
B
].
6 Press Save, then press [OFF].
Handset
OR
Examp
l
e
9P15556667777
|
Clear Pause
K
L
9P15551234567
|
=Next P
K
fd
L
Phone number
Handset Base Unit
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set flash time
Back Select
K
d
BL
Set flash time
:700ms
Back Save
K
d
BL
PQQX14670ZA.book 44 ページ ２００５年２月２２日 火曜日 午後１２時０分