Filter
Top Products
Programmable Settings
14
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse
service, set to “Pulse”. The factory preset is “Tone”.
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “Line in
use” on the handset is not displayed properly or the IN USE indicator on the base
unit does not light properly, the line mode selection is incorrect. Set line mode to
“A”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Press Select at “Set dial mode”.
5 Select “Pulse” or “Tone” by pressing [
d
] or
[
B
].
6 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Set line mode” by pressing [
d
] or
[
B
], then press Select.
5 Select “A” or “B” by pressing [
d
] or [
B
].
6 Press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set dial mode
Back Select
K
d
BL
Set dial mode
:Tone
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
Set tel line
Back Select
K
d
BL
Set line mode
Back Select
K
d
BL
Set line mode
:B
Back Save
K
d
BL
PQQX14670ZA.book 14 ページ ２００５年２月２２日 火曜日 午後１２時０分