Filter
Top Products
Special Features
48
• If the Dial Lock is turned on, the handset displays “Dial lock” while not in use
and the DIAL LOCK indicator on the base unit lights. “Dial lock” is not
displayed, if the handset is off the base unit when there are missed calls (p. 28).
To cancel the Dial Lock (use either the handset or the base unit)
• If you make a call while the Dial Lock is turned on:
— using the handset, the handset beeps 3 times and “Dial locked” is
displayed.
— using the base unit, the base unit beeps 3 times.
• Please write down your password. If you forget your password, consult your
nearest Panasonic service center.
1 Press [MENU].
2 Scroll to “Dial lock” by pressing [
d
] or [
B
],
then press Select.
3 Enter the password set when the Dial Lock
was turned on.
4 Press Save.
5 Press Yes, then press [OFF].
•“Dial lock off” is displayed.
• If you entered the wrong password, the handset
beeps 3 times and “Save error” is displayed.
Enter the correct password.
1 Press [DIAL LOCK].
•The DIAL LOCK indicator flashes.
2 Enter the password set when the Dial Lock was turned on.
3 Press [DIAL LOCK].
• A long beep sounds and the indicator light goes out.
• If you entered the wrong password, the base unit beeps 3 times. Start again
from step 1.
Handset
Dial lock
Back Select
K
d
BL
Enter password
:
_
_
_
_
Back
K
Enter password
:
@@@@
Back Save
K
L
Turn Dial lock
off?
Back Yes
K
L
Base Unit
PQQX14670ZA.book 48 ページ ２００５年２月２２日 火曜日 午後１２時０分