Filter
Top Products
Basic Operation
25
Caller ID Service
This unit is compatible with Caller ID services offered by your telephone company. If
you subscribe to Caller ID, caller’s information will be displayed and recorded in the
Caller List.
How Caller ID information is displayed
When a call comes in, the unit will ring and the caller
information will be received. Once the caller information is
received, the handset display shows the caller’s phone
number after the ring.*
• After you answer the call, the display will show the
length of the call.
*Private name display
If you receive a call from one of the phone numbers
stored in the phone book, the handset will show the
caller’s name stored in the phone book.
• To use this function, names and phone numbers must be stored in the phone book
(p. 33).
• If the unit does not receive Caller ID information, one of the following will be
displayed:
• Depending on the radio communications with the base unit, the handset may not
display Caller ID information immediately after the ring.
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID service.
• If the name and the time/date display service is available in your area, the display
will show callers’ names and the time/date the calls were received. For further
information, please contact your telephone company.
• You need to adjust the date and time to show the time and date the calls were
received in the Caller List (p. 13).
Display Meaning
Out of area The caller dialed from an area which does not provide
Caller ID service.
Private caller The caller requested not to send his/her information.
Example
15552223333
TINA ROBINSON
15552223333
Example
PQQX14670ZA.book 25 ページ ２００５年２月２２日 火曜日 午後１２時０分