Filter
Top Products
Useful Information
51
Wall Mounting
This unit can be mounted on a wall.
1 Push the hook and turn it
upward. Turn the hook until a
click is heard.
2 Press the tabs in the direction
of the arrows (1), then remove
the wall mounting adaptor (2).
3 Connect the AC adaptor. Tuck
the telephone line cord inside
the wall mounting adaptor, then
push the adaptor in the direction
of the arrows (1 and 2).
• The word “UP WALL” should face
upward.
• Fasten the AC adaptor cord to
prevent it from being disconnected.
4 Install screws using the wall
template below. Connect the
telephone line cord. Mount the
unit, then slide it down.
• Raise the antenna.
5 To charge the handset battery:
Rest the handset on the
charge contacts (1), then
push the top of the handset so
the hook snaps into the slot at
the top of the handset (2).
• The unit beeps once and the
CHARGE indicator lights.
Wall Template
2
1 1
1
2
To Power Outlet
Hook
To Single-Line
Telephone Jack
8.3 cm
Screws
(not included)
1
2
Hook
Slot
OR
8.3 cm
PQQX14670ZA.book 51 ページ ２００５年２月２２日 火曜日 午後１２時０分