Preparation
19
Programmable Settings
Setting the base unit ringer tone by using the
LCD Contrast
There are 6 levels of LCD contrast. The factory preset is “level 3”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Scroll to “Set base unit” by pressing [
d
] or
[
B
], then press Select.
4 Press Select at “Ringer tone”.
5 Select the desired ringer tone by pressing [
d
]
or [
B
].
• The base unit will ring and the ringer tone will
change. If the base unit ringer volume has been
turned off, the base unit will not ring (p. 17).
• You can also select the ringer tone by pressing [1]
to [7].
6 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3 Press Select at “LCD contrast”.
4 Select the desired contrast by pressing [
d
] or
[
B
].
• The contrast will change.
5 Press Save, then press [OFF].
Handset
Initial setting
Back Select
K
d
BL
Set base unit
Back Select
K
d
BL
Ringer tone
Back Select
K
d
BL
Ringer tone
1:Tone 1
Back Save
K
d
BL
Handset
Initial setting
Back Select
K
d
BL
LCD contrast
Back Select
K
d
BL
LCD contrast
Low High
Back Save
K
d
BL
Ex. Level 3
PQQX14670ZA.book 19 ページ 2005年2月22日 火曜日 午後12時0分