Filter
Top Products
73
Chapter 5Useful Information
Problem
You cannot dial.
Static, sound cuts in/out,
fades.
Interference from other
electrical units.
You cannot store a phone
number in memory.
While programming, the unit
starts to ring and stops the
program.
(Page) does not function.
Remedy
• The dialling mode setting is incorrect.
Please check the dialling mode (p. 17).
• The unit is in the call prohibition mode.
To cancel the mode, see page 37.
• The number which you dialled is
restricted. To cancel the number, see
page 39.
• Key lock mode is set. To cancel the
mode, see page 32.
• Locate the handset and base unit away
from other electrical appliances (p. 5).
• Move closer to the base unit.
• Raise the base unit antenna.
• You cannot store a phone number while
the unit is in the talk or intercom mode.
• Do not pause for over 60 seconds while
storing.
• To answer the call, press (Talk).
Start from the beginning after hanging up.
• The handset is too far from the base unit.
• The handset is engaged in an outside
call. Wait until the in use indicator ( )
goes out.
KX-TCD950E(E)(72~) 98.6.24 7:55 PM Page 73