Filter
Top Products
29
Chapter 2 Basic Operations
Special Features
Program Button
Redial/Pause Button
Tone Button
Recall Button
INT
Intercom Button
Setting the pause timing
You can select the pause timing, 3 seconds or 5 seconds, according to your
PBX requirements. The factory preset is 1 (3 seconds).
1. Press (Program), then (Intercom).
2. Press .
3. Enter the base unit password (p. 35).
4. Press .
•The current pause timing is displayed.
5. To select 5 seconds, press .
OR
To select 3 seconds, press .
•The setting is displayed.
6. When finished, press (Program).
•A confirmation tone sounds.
1
2
3
3
INT
How to Use the Pause Button
(For Analogue PBX Line/Long Distance Service Users)
We recommend you press (Redial/Pause) if a pause is required for
dialling with a PBX or to access a long distance service.
Ex: Line access number (PBX)
(Redial/Pause)
•Pressing (Redial/Pause) once creates a pause.
This prevents misdialling when you redial or dial a stored number.
•Pressing (Redial/Pause) more than once increases the length of the
pause between numbers.
Phone number
9
9
KX-TCD950E(E)(23~44) 98.6.25 4:58 PM Page 29