Filter
Top Products
Important Information
2
APPROVED for connection to
telecommunication systems spec-
ified in the instructions for use
subject to the conditions set out
in them.
608310
Do not connect the AC adaptor to any
AC outlet other than the standard AC
230–240 V, 50 Hz.
• Outlet voltage DC1 8 V, 300 mA
Outlet voltage DC2 9 V, 200 mA
• The apparatus is approved for use
with the KX-TCA9E power supply.
• CAUTION: Do not remove cover.
Live parts inside.
This apparatus has been approved for
the use of the following facilities:
1) Storage of telephone numbers for
retrieval by a predetermined code
2) Last number redial
3) Simple telephone facility
4) PBX earth register recall
PBX timed break register recall
5) MF signalling
6) LD signalling
7) Pause
8) 1 way paging
9) Call prohibition
10) Call restriction
11) Direct call
12) Intercom between handsets
13) Transferring a call from one handset to
another
14) Conference
15) Setting the call waiting tone
16) Accessing the base unit
Any other usage will invalidate the
approval of the apparatus if as a
result, it then ceases to conform to the
standards against which approval was
granted.
Ringer Equivalence Number (REN):
This relates to the performance of the
apparatus when used in combination
with other items of apparatus. It
enables the calculation of the
maximum number of items of
apparatus that may be connected
simultaneously to the line by summing
the REN values of each item. A BT
supplied instrument has a REN value
of 1 unless otherwise marked.
A maximum REN value of 4 should
not be exceeded. The REN value of
this apparatus is 1.
Method of connection
This is connected to the exchange line
or PABX/PMBX (Private Automatic/
Manual Branch Exchange) extension
by the new standard British Telecom
plug and socket. Arrangements for
provision of this type of termination
can be made through the nearest
British Telecom Sales Office. The
apparatus may be connected to the
following types of installation. The
apparatus has been approved for use
under the following conditions:
a) This apparatus may be used on
telecommunication systems
employing LD and MF signalling. It
is suitable for connection to a direct
exchange line on the PSTN (Public
Switched Telephone Network) or via
a compatible PBX (Private Branch
Exchange). (Contact the supplier
for an up to date list of compatible
PBX’s.)
KX-TCD950E(E)(00~11) 98.6.25 5:00 PM Page 2