Filter
Top Products
14
Settings
Battery Charge
At the time of shipment, the battery is not
charged. To charge, place the handset on
the base unit. Please charge the battery
for at least 3 hours before initial use.
• Once the handset is placed on the base
unit, the charge indicator ( ) lights.
Battery strength
You can check the present battery strength on the display.
The battery strength is as shown in the chart below.
Display prompt Battery strength
The battery is fully charged.
The battery strength is medium.
The battery strength is low.
The battery needs to be charged.
Recharge
When " " flashes or the unit beeps every
15 seconds, recharge the battery.
(Flashing)
Charge Indicator ( )
KX-TCD950E(E)(12~22) 98.6.24 7:55 PM Page 14