Filter
Top Products
46
On the base unit
This function enables the base unit to clear the following settings at one time.
All settings will return to the default settings (shown in brackets).
1
Press (Program), then (Intercom).
2
Press .
3
Enter the base unit password (p. 35).
4
When finished, press (Program).
• A confirmation tone sounds.
0
INT
0
- - - -
- - - - - - - - - - - -
– Bell selection 1 (All)
– Dialling mode 1 (TONE)
– Pause timing 1 (3 seconds)
– Call restricted handset(s) (All clear)
– Call restriction number(s) (All clear)
– Base unit password (0000)
– FLASH/EARTH mode 1 (FLASH)
Clearing the Settings in Memory
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 46