Filter
Top Products
56
Selecting the First Handset
One handset will ring first, then all of the handsets will ring if the first handset
does not answer the call. You can select which handset will ring first and the ring
count (1 to 6) until all of the handsets ring.
1
Press (Program), then (Intercom).
2
Press .
3
Enter the base unit password (p. 35).
•The current setting is displayed.
4
Press .
• The current registered handset number(s)
is/are displayed.
• The current selected handset number(s)
is/are flashing.
5
Press the handset number you wish to ring
using the dialling buttons.
• The selected handset number flashes.
• If you misdial, press the number again.
• You must enter a handset number.
If you do not enter a handset number,
(Program) will not be accepted in step 6.
6
When finished, press (Program).
• The handset number is stored.
• The current ring count is displayed.
4
1
INT
i
- - - -
i 4 - i 23456
Ex. Handsets 1, 2, 3, 4, 5
and 6 are registered.
i 4 - i 23456
Ex. Handset 1 will ring.
i i
Ex. "All handsets" is
selected.
i 4 - i 23456 - 3
For Optional Multi-Handset Users
KX-TCD950E(E)(45~61) 98.6.24 7:52 PM Page 56