Filter
Top Products
Built-In ACD Supervisor Guide Section 521
576-3.6-521 (ACD 4.0) DBS 576 (USA) issued October 2000 11
ALL DELETE (FF6)
This command deletes all settings currently set to all lines in the currently
displayed program.
1. Press key
0
, and the
HOLD
key.
2. All of the program that was displayed is deleted, and only the
default END/DISC line is displayed.
Note:
If you press
soft
key
10
and select List at any of the above steps, the
List Mode screen is redisplayed.
Transfer Destination Voice Number
Outline
Sets the voice mail extension line number and access code corresponding to
the transfer destination voice mail number (1 to 4).
Operation
1. From [SUPERVISOR MENU] screen, press the
soft
key
3
or
8
to
select [CUSTOMIZE].
Program Delete:
DELETE(Program)
To Delete Program
Data, Press 0 and
HOLD Key
List
→
END/DISK
01:Select FFKey
SUPERVISOR MENU
SYSTEM INFO
→
MIS REPORT
→
CUSTOMIZE
→